• BUY DIRECT

    We design, manufacture and sell in the UK

  • BEST PRICE GUARANTEE

    We can't and won't be beaten on price!

  • FREE DELIVERY

    To UK Mainland orders over £249

  • 45-DAY RETURNS

    Don't like it? Send it back! Simple

Walther Elegance Full Depth Convector Gas Fire

Share
Item no: SF1-313-000
from £235.20
Walther Elegance Chrome & Black

Click to enlarge

Walther Elegance Full Depth Convector Gas Fire Share
Item no: SF1-313-000
from

Regular Price: £294.00

Special Price £235.20

Full Depth Convector ERP Product Data Sheet

Product Fiche

Supplier's name or trademark; Superior Fires

Model identifier; Conventional Full Depth Inset Convector Heater Gas Category/Pressure = I2H(20)

Energy Efficiency Class of the model; F

Direct heat output; 3.2 kW

Indirect heat output; N.A.

Energy Efficiency Index; 44

Useful Energy Efficiency at nominal heat output; 53.1%

Useful Energy Efficiency at minimum load; 53.1%

Specific precautions that shall be taken when the local space heater is assembled, installed or maintained;

This appliance must be installed, commissioned and maintained by a competent person. Prior to installation the competent person must ensure that the local distribution conditions (identification of the type of gas and pressure) and adjustment of the appliance are compatible.

The competent person must refer to and comply with the specific instructions listed in the
Installation Manual before starting to install and commission the appliance.

  • 4.0kW Heat Output (Gross)
  • Open Fronted Gas Fire
  • 3 Year Guarantee

* Required Fields

Regular Price: £294.00

Special Price £235.20

  • BUY DIRECT

    We design, manufacture and sell in the UK

  • BEST PRICE GUARANTEE

    We can't and won't be beaten on price!

  • FREE DELIVERY

    To UK Mainland orders over £249

  • 45-DAY RETURNS

    Don't like it? Send it back! Simple

Walther Full Depth Convector Inset Gas Fire

  • Full depth convector showcases beautiful flame picture 
  • Requires a min. fireplace depth of 250mm (+ 20mm debris collection) 
  • Instant 4.0kW heat output (Gross)
  • Open fronted for increased realism
  • OVERVIEW: Impressive full depth convector gas fire with fantastic flame picture designed for deep fireplace openings

The Walther is a full depth convector inset gas fire designed to fit homes with a larger class 1 or 2 pre-fabricated flue system (min. 127mm or 5" diameter) or conventional class 1 brick chimney. It features a clever heat exchanger that provides convected heat in addition to standard radiant heat. The full depth convector platform uses the same deep burner tray as its full depth radiant counterpart. This signifies that the Walther also produces a stunning flame picture and under bed glow from it's deep fuel bed. 

It is important to note that all this technology does come with a trade-off. Despite fitting most fireplace openings, typically 16" wide x 22" high (please refer to product specification - excludes low lintels) the Walther's full depth convector firebox is much larger than other models and requires a minimum of 250mm plus 20mm for debris collection. This can limit its options where installation is concerned and therefore it is important to check its compatibility with the destined fireplace opening.

The Walther is available with coal, pebble or log effect fuel bed, and can be specified in Manual Control (Rotary), Manual (Fingerslide) or Remote Control.

The Elegance fret is a traditional vertical cast design with a modern twist that imitates a classic solid fuel fire grate. It has a curved profile and is intended to stand in front of the fire and frame. The ashpan is a separate component and provides access to the controls (depending on the model). The Elegance fret is available in: brass (solid brass), brass & black (solid brass), chrome (chrome plated brass), chrome & black (lightweight aluminium), black (lightweight aluminium). The one-piece frame is held in position with magnets (supplied) and depending on the model is available in: brass effect, chrome effect or black.

Please note the price is dependent upon the final configuration. Natural gas only.
This information is intended for guidance only. Superior Fires recommends booking a Home Survey to determine the actual chimney or flue specification.

Model IdentifierConventional Full Depth Inset Convector Heater Gas Category/Pressure = I2H(20)
Heat Input Gross (High)6.8kW
Heat Input Gross (Low)3.5kW
Heat Output Gross (High)4.0kW
Heat Output Gross (Low)2.1kW
Direct Heat Output3.2kW
Heat TypeRadiant & Convected Heat
Chimney Flue CompatibilityPre-Fabricated - Class 2 (127mm/5" Diameter)
Conventional Chimney - Class 1 (178mm/7" Diameter or Greater)
Control IgnitionBattery-Free Piezo Spark Ignition (Manual - Rotary Control)
Battery Spark Ignition (Manual - Fingerslide Control)
Battery Spark Ignition (Remote Control)
Control LocationLow Level - Front - Behind Ash Pan (Manual - Rotary Control)
High Level - Right - Side (Manual - Fingerslide Control)
Handset (Remote Control)
Air Vent RequiredNot Required
Manufacturer Guarantee3 Years
Safety FeaturesFlame & Oxygen Monitoring Device
Installation RequirementGas Safe Registered Installer (Bord Gais - ROI)
Installation InformationAs with any open fire, a fire guard complying with BS 8423 must be used. Fire guards are intended to protect people from falling into a fire, prevent burns and reduce the risk of injury, particularly to young children and the infirm. In addition it is intended to reduce the risk of fire resulting from clothing and/or other flammable materials coming into contact with, or in proximity to, burning fuel and/or hot surfaces.
Fuel TypeNatural Gas
Fire TypeOpen Fronted
Installation TypeInset
Engine TypeFull Depth Convector
Width Outline A480mm
Height Outline B595mm
Depth Outline C250mm
Rear Width Min D1380mm
Rear Width Max D2380mm
Rear Height E545mm
Opening Width Min X1380mm
Opening Width Max X2450mm
Opening Height Min Y1540mm
Opening Height Max Y2575mm
Opening Depth Min Z270mm
Packaging Width575mm
Packaging Height670mm
Packaging Depth360mm
Packaging Weight22.0kg
Rebate Depth250mm

Be the first to write a review and click the button below...

Write your own review

Write a Review

Write a review about the Walther Elegance Chrome & Black Full Depth Convector Gas Fire by completing the form below. Please complete all fields marked with an *

Write a Review

Write a review about the Walther Elegance Chrome & Black Full Depth Convector Gas Fire by completing the form below. Please complete all fields marked with an *

other people also looked at...

  • Home Survey &
    Installation

    Complete installation service
    for your peace of mind

    Learn More

    Home Survey & Installation

    At Superior Fires we understand that buying a fire or fireplace can be a sometimes daunting and difficult task. You may have read our Help & Advice section, and even shortlisted a few products however, before purchasing you would prefer to be reassured that you have selected the product/s and that they are right for your needs. If this is the case then our Home Survey & Installation service is perfect for you.

     

     

  • Free UK
    Delivery*

    Free UK mainland delivery
    on all orders over £250

    Learn More
  • Fire
    Calculator

    Enter your room size and find
    the perfect fire for your home

    Calculate

    Fire Calculator

    Enter in your room size and find the perfect fire place for you.