DAY RETURNS
INTEREST FREE PAYMENTS
PRICE MATCH PROMISE

Londra Casona LED Reflections Electric Fire

In stock
Item No:
SF5-106-001
£259.00
  • Coal Effect Fuel Bed
  • 2.0kW Heat Output
  • LED Reflections Technology
£259.00
Manuals/PDF's Details Specifications Reviews

Londra LED Reflections Inset Electric Fire

  • LED Reflections Technology - low energy & enhanced flame effect
  • Powerful 2.0kW heat output
  • Remote control
  • Flame-effect only setting - without heat 
  • OVERVIEW: Great looking electric fire with enhanced LED flame picture

The Londra takes our standard electric fire to another dimension. Our premium range of LED Reflections electric fires include a special reflective glass window which increases the flame effect depth giving the illusion that the flame is burning from deep behind the fuel bed.

LED technology not only provides a deeper, richer flame picture with enhanced flame movement but is also a fraction of the cost to run when compared to a conventional incandescent bulb. The inset electric fire features a 2.0kW heat output, flame effect only setting – no heat, thermostatic control, timer control, full remote control or buttons on the front of the fire below the canopy. A helpful LED display is located in the top left hand corner of the window which displays, flame brightness, timer, thermostatic control and a moulded plastic coal effect fuel bed.  A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The Londra fits a standard fireplace opening, typically 16" wide x 22" high (please refer to specification).

For added convenience two spacer frames are provided (supplied fitted) to allow the Londra to be taken out of the box, placed flush against a flat wall and plugged in for instant heat - no chimney or flue depth required. For installation into a fireplace opening, one or both spacer frames can be removed (depending on the available fireplace depth). This provides the following options: fully inset (0 spacers - requires a 114mm fireplace depth), semi-inset (1 spacer fitted - requires a 54mm fireplace depth) or flush-fit (2 spacers - 0mm fireplace depth).

The Casona is a premium contemporary frame in chrome effect finish. The design features three curved horizontal bars that seamlessly blend into the frame for a minimalist aesthetic. The Casona has been specially engineered from extruded aluminium to create a unique design with precision detailing that requires no pre-assembly. Another unique feature of this frame is that the lower two bars are designed to be a clever ashpan which when removed allows access to the controls, if applicable (model dependent). The Casona frame is held in position with magnets (supplied).

Please note the price is dependent upon the final configuration.
This information is intended for guidance only. Superior Fires recommends booking a Home Survey to determine whether this appliance is compatible with your requirements.

Batteries are not included.

More Information
Heat Input Gross (High) 2.0kW
Heat Input Gross (Low) 1.0kW
Heat Output Gross (High) 2.0kW
Heat Output Gross (Low) 1.0kW
Heat Type Fan Heater
Chimney Flue Compatibility No Chimney or Flue Required
Control Location High Level - Front - Below Canopy (Manual - Buttons) & Remote Control
Manufacturer Guarantee 3 Years
Installation Requirement Qualified Electrician Recommended
Installation Information All electric fires feature an automatic safety cut-out device. Simply plug into a standard socket. No chimney or flue required. Designed for use in Great Britain and Republic of Ireland only. All fires must be installed in accordance with the manufacturer’s installation and user instructions and current Building Regulations.
Heat Direction Frontwards
Technology Low energy LED flame effect
Power Voltage Supply 220 - 240V
Colour Chrome
Control Type Manual - Button & Remote Control
Fuel Type Electric
Installation Type Inset
Engine Type LED Reflections
Width Outline A 480mm
Height Outline B 595mm
Depth Outline C 114mm
Depth Spacer 1 C1 57mm
Depth Spacer 2 C2 57mm
Rear Width Min D1 390mm
Rear Width Max D2 480mm
Rear Height E 555mm
Opening Width Min X1 400mm
Opening Width Max X2 450mm
Opening Height Min Y1 560mm
Opening Height Max Y2 580mm
Opening Depth Min Z 0mm (2 spacers), 57mm (1 spacer), 114mm (0 spacers)
Packaging Width 545mm
Packaging Height 660mm
Packaging Depth 230mm
Packaging Weight 13.5kg
Write a Review
Your Rating