Sonora DGF Gas Fire
- Full depth fuel bed
- Taper Tray
Sonora DGF Inset Gas Fire
- Tapered inset gas tray
- Full depth fuel bed
- Ideal for Victorian Fireplaces converting from solid fuel
- OVERVIEW: Useful standalone tapered gas tray to be used with suitable fire backs or chair bricks
The Sonora is a full depth inset tapered burner tray designed to fit a standard chair brick (also commonly referred to as a fire back). Chair bricks are popular in older homes with a class 1 brick chimney, orginally used for burning solid fuel. The Sonora requires a min. 178mm / 7" pre-fabricated flue system or conventional brick chimney. It is classed as a Decorative Gas Fire (DGF). The Sonora produces a lovely full depth flame picture however, as this is an open fronted fire placed within a chair brick (without a modern firebox).
The Sonora can be specified in Manual Control (Rotary) or Remote Control and is available with coal, pebble or log fuel bed.
Please note the price is dependent upon the final configuration. Natural gas only.
This information is intended for guidance only. Superior Fires recommends booking a Home Survey to determine the actual chimney or flue specification.
This product is not suitable for primary heating
|Heat Input Gross (High)
|Heat Input Gross (Low)
|Chimney Flue Compatibility
|Pre-Fabricated - Class 1 (178mm/7" Diameter or Greater), Conventional Chimney - Class 1 (178mm/7" Diameter or Greater)
|Battery-Free Piezo Spark Ignition (Manual - Rotary Control), Battery Spark Ignition (Remote Control)
|Low Level - Front - Behind Ash Pan (Manual - Rotary Control), Handset (Remote Control)
|Air Vent Required
|Flame & Oxygen Monitoring Device
|Gas Safe Registered Installer (Bord Gais - ROI)
|As with any open fire, a fire guard complying with BS 8423 must be used. Fire guards are intended to protect people from falling into a fire, prevent burns and reduce the risk of injury, particularly to young children and the infirm. In addition it is intended to reduce the risk of fire resulting from clothing and/or other flammable materials coming into contact with, or in proximity to, burning fuel and/or hot surfaces.
|Width Outline A
|Height Outline B
|Depth Outline C
|Rear Width Min D1
|Rear Width Max D2
|Rear Height E
|Opening Width Min X1
|Opening Width Max X2
|Opening Height Min Y1
|Opening Height Max Y2
|Opening Depth Min Z