Londra Elysee LED Reflections Electric Fire
- Coal Effect Fuel Bed
- 2.0kW Heat Output
- LED Reflections Technology
Londra LED Reflections Inset Electric Fire
- LED Reflections Technology - low energy & enhanced flame effect
- Powerful 2.0kW heat output
- Remote control
- Flame-effect only setting - without heat
- OVERVIEW: Great looking electric fire with enhanced LED flame picture
The Londra takes our standard electric fire to another dimension. Our premium range of LED Reflections electric fires include a special reflective glass window which increases the flame effect depth giving the illusion that the flame is burning from deep behind the fuel bed.
LED technology not only provides a deeper, richer flame picture with enhanced flame movement but is also a fraction of the cost to run when compared to a conventional incandescent bulb. The inset electric fire features a 2.0kW heat output, flame effect only setting – no heat, thermostatic control, timer control, full remote control or buttons on the front of the fire below the canopy. A helpful LED display is located in the top left hand corner of the window which displays, flame brightness, timer, thermostatic control and a moulded plastic coal effect fuel bed. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The Londra fits a standard fireplace opening, typically 16" wide x 22" high (please refer to specification).
For added convenience two spacer frames are provided (supplied fitted) to allow the Londra to be taken out of the box, placed flush against a flat wall and plugged in for instant heat - no chimney or flue depth required. For installation into a fireplace opening, one or both spacer frames can be removed (depending on the available fireplace depth). This provides the following options: fully inset (0 spacers - requires a 114mm fireplace depth), semi-inset (1 spacer fitted - requires a 54mm fireplace depth) or flush-fit (2 spacers - 0mm fireplace depth).
The Elysee fret is a modern cast design with horizontal curved bars. It has a slightly bowed profile with wider tapering feet detail which deliberately reduces the size of the ashpan making it a less prominent feature of this design. The ashpan is a separate component and provides access, if applicable, to the controls (model dependent). The Elysee fret is available in: brass (solid brass), brass & black (solid brass), chrome (chrome plated brass), chrome & black (lightweight aluminium), black (lightweight aluminium). The Elysee fret is designed to free stand in front of the fire and frame. The one-piece frame is held in position with magnets (supplied) and depending on the model is available in: brass effect, chrome effect or black.
Please note the price is dependent upon the final configuration.
This information is intended for guidance only. Superior Fires recommends booking a Home Survey to determine whether this appliance is compatible with your requirements.
Batteries are not included.
|Heat Input Gross (High)||2.0kW|
|Heat Input Gross (Low)||1.0kW|
|Heat Output Gross (High)||2.0kW|
|Heat Output Gross (Low)||1.0kW|
|Heat Type||Fan Heater|
|Control Location||High Level - Front - Below Canopy (Manual - Buttons) & Remote Control|
|Manufacturer Guarantee||3 Years|
|Safety Features||Thermal Trip Switch|
|Installation Requirement||Qualified Electrician Recommended|
|Installation Information||All electric fires feature an automatic safety cut-out device. Simply plug into a standard socket. No chimney or flue required. Designed for use in Great Britain and Republic of Ireland only. All fires must be installed in accordance with the manufacturer’s installation and user instructions and current Building Regulations.|
|Technology||Low energy LED flame effect|
|Power Voltage Supply||220 - 240V|
|Control Type||Manual - Button & Remote Control|
|Engine Type||LED Reflections|
|Width Outline A||480mm|
|Height Outline B||595mm|
|Depth Outline C||114mm|
|Depth Spacer 1 C1||57mm|
|Depth Spacer 2 C2||57mm|
|Rear Width Min D1||390mm|
|Rear Width Max D2||480mm|
|Rear Height E||555mm|
|Opening Width Min X1||400mm|
|Opening Width Max X2||450mm|
|Opening Height Min Y1||560mm|
|Opening Height Max Y2||580mm|
|Opening Depth Min Z||0mm (2 spacers), 57mm (1 spacer), 114mm (0 spacers)|