Clara Kinloch Brushed Steel Real Coal LED Electric Fire
- 2.0kW Heat Output
- LED Technology
Clara LED Inset Electric Fire
- LED Technology - low energy flame effect
- Powerful 2.0kW heat output
- Flame-effect only setting - without heat
- OVERVIEW: Great entry level electric fire with LED flame picture
The Clara LED inset electric fire features LED technology designed to significantly improve the flame picture and running performance. LED technology not only provides a deeper, richer flame picture with enhanced flame movement but is also a fraction of the cost to run when compared to a conventional incandescent bulb. It will last a lot longer too. To keep operation simple there are three switch settings: 1) Flame effect only, 2) Flame + 1.0kW Heat and 3) Flame + 2.0kW Heat. The controls are located high underneath the hood for easy accessibility. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The Clara fits a standard fireplace opening, typically 16" wide x 22" high (please refer to specification).
For added convenience two spacer frames are provided (supplied fitted) to allow the Clara to be taken out of the box, placed flush against a flat wall and plugged in for instant heat - no chimney or flue depth required. For installation into a fireplace opening, one or both spacer frames can be removed (depending on the available fireplace depth). This provides the following options: fully inset (0 spacers - requires a 114mm fireplace depth), semi-inset (1 spacer fitted - requires a 54mm fireplace depth) or flush-fit (2 spacers - 0mm fireplace depth).
The Kinloch is a very popular contemporary frame finished in cool brushed stainless steel. Installed with a modern fireplace the Kinloch can really help transform the look and feel of your living room. The Kinloch comprises of a one piece frame with two horizontal curved bars and a freestanding ashpan. The frame is held in position with magnets (supplied). Designed with affordability in mind the Kinloch is supplied as a self assembly kit to reduce costs. Please note careful attention is required to assemble the frame. The curved bars and ashpan are pre-rolled and as a result of packaging and transit may require slight adjustment to the curvature at the assembly stage.
Please note the price is dependent upon the final configuration.
This information is intended for guidance only. Superior Fires recommends booking a Home Survey to determine whether this appliance is compatible with your requirements.
|Heat Input Gross (High)||2.0kW|
|Heat Input Gross (Low)||1.0kW|
|Heat Output Gross (High)||2.0kW|
|Heat Output Gross (Low)||1.0kW|
|Heat Type||Fan Heater|
|Chimney Flue Compatibility||No Chimney or Flue Required|
|Control Location||High Level - Front - Below Canopy (Manual - Buttons) & Remote Control|
|Manufacturer Guarantee||3 Years|
|Installation Requirement||Qualified Electrician Recommended|
|Installation Information||All electric fires feature an automatic safety cut-out device. Simply plug into a standard socket. No chimney or flue required. Designed for use in Great Britain and Republic of Ireland only. All fires must be installed in accordance with the manufacturer’s installation and user instructions and current Building Regulations.|
|Power Voltage Supply||220 - 240V|
|Control Type||Manual - Switch Control|
|Width Outline A||480mm|
|Height Outline B||595mm|
|Depth Outline C||114mm|
|Depth Spacer 1 C1||57mm|
|Depth Spacer 2 C2||57mm|
|Rear Width Min D1||390mm|
|Rear Width Max D2||480mm|
|Rear Height E||555mm|
|Opening Width Min X1||400mm|
|Opening Width Max X2||450mm|
|Opening Height Min Y1||560mm|
|Opening Height Max Y2||580mm|
|Opening Depth Min Z||0mm (2 spacers), 57mm (1 spacer), 114mm (0 spacers)|