We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Chewton Edwardian Cast Slimline Gas Fire
- 3.2kW Direct Output
- Open Fronted Gas Fire
- 3 Year Guarantee
Chewton Slimline Radiant Inset Gas Fire
- Slimline Design only requires 110mm (+ 20mm debris collection)
- Fits almost any chimney or flue type (standard opening - excludes low lintel)
- Open fronted for increased realism
- OVERVIEW: Good entry level slimline gas fire that will fit almost any chimney or flue
The Chewton slimline radiant inset gas fire is one of our most popular models thanks to it's slimline design and affordable price point. It is designed to fit virtually 99% of any modern pre-cast flues, pre-fabricated flue systems (class 1 or class 2 with min. 127mm or 5" diameter) or conventional chimneys. The slimline firebox fits a standard opening, generally 16" wide x 22" high (please refer to product specification). Most importantly this fire only requires a fireplace depth of 110mm plus 20mm for debris collection.
The Chewton provides sufficient heat to warm a medium sized room within a modern home. This fire can be specified with coal or pebble effect fuel bed and is available in either Manual (Rotary), Manual (Fingerslide) or Remote Control. It does not require a mains power supply however, the Manual (Fingerslide) and Remote options require a battery (supplied) for ignition only.
The Edwardian Timeless frame is a premium solid cast design with integral fret. It is inspired by classic Edwardian period styling and adopts the same traditional iron foundry techniques in its manufacture. The Edwardian frame features three horizontal fret bars with inscribed line detailing and two spherical shaped finials. The angular shaped designed ashpan is a separate component which protrudes forward from the frame and when removed provides access, if applicable, to the controls (model dependent). The Edwardian is available in polished cast iron or black finish. This product has been manufactured using traditional sand casting techniques. Naturally, some minor imperfections such as pitting and black residual polishing marks may be visible, although this is a direct result of the production and finishing process and is intentionally employed to achieve the authentic appearance.
Please note the price is dependent upon the final configuration. Natural gas only.
This information is intended for guidance only. Superior Fires recommends booking a Home Survey to determine the actual chimney or flue specification.
Model Identifier | Conventional Slimline Inset Radiant Heater Gas Category/Pressure = I2H(20) |
---|---|
Heat Input Gross (High) | 6.2kW |
Heat Input Gross (Low) | 3.5kW |
Heat Output Gross (High) | 3.1kW |
Heat Output Gross (Low) | 1.8kW |
Direct Heat Output | 3.2kW |
Heat Type | Radiant Heat |
Chimney Flue Compatibility | Pre-Cast (Minimum Size 12,500mm²), Pre-Fabricated - Class 2 (127mm/5" Diameter), Conventional Chimney - Class 1 (178mm/7" Diameter or Greater) |
Control Ignition | Battery-Free Piezo Spark Ignition (Manual - Rotary Control), Battery Spark Ignition (Manual - Fingerslide Control), Battery Spark Ignition (Remote Control) |
Control Location | Low Level - Front - Behind Ash Pan (Manual - Rotary Control), High Level - Right - Side (Manual - Fingerslide Control), Handset (Remote Control) |
Air Vent Required | Not Required |
Manufacturer Guarantee | 3 Years |
Safety Features | Flame & Oxygen Monitoring Device |
Installation Requirement | Gas Safe Registered Installer (Bord Gais - ROI) |
Installation Information | As with any open fire, a fire guard complying with BS 8423 must be used. Fire guards are intended to protect people from falling into a fire, prevent burns and reduce the risk of injury, particularly to young children and the infirm. In addition it is intended to reduce the risk of fire resulting from clothing and/or other flammable materials coming into contact with, or in proximity to, burning fuel and/or hot surfaces. |
Fuel Type | Natural Gas |
Fire Type | Open Fronted |
Installation Type | Inset |
Engine Type | Slimline Radiant |
Width Outline A | 480mm |
Height Outline B | 595mm |
Depth Outline C | 110mm |
Rear Width Min D1 | 215mm |
Rear Width Max D2 | 350mm |
Rear Height E | 545mm |
Opening Width Min X1 | 350mm |
Opening Width Max X2 | 450mm |
Opening Height Min Y1 | 540mm |
Opening Height Max Y2 | 575mm |
Opening Depth Min Z | 130mm |
Packaging Width | 640mm |
Packaging Height | 715mm |
Packaging Depth | 410mm |
Packaging Weight | 20.5kg |
Rebate Depth | 110mm |