We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Asaba Blenheim Slimline Gas Fire
- 4.1kW Heat Output (Gross)
- Open Fronted
Asaba Slimline Convector Inset Gas Fire
- Slimline design requires min. 125mm depth (+ 20mm debris collection)
- Fits almost any chimney or flue type (standard opening - excludes low lintel)
- Excellent heat output 4.1kW (Gross)
- Open fronted for increased realism
- OVERVIEW: Exceptional slimline gas fire with excellent heat and efficiency that is suitable for most homes
The Asaba is a slimline convector inset gas fire designed for homes with a shallow pre-cast flue, class 1 or class 2 pre-fabricated flue systems (min. 127mm or 5" diameter) or conventional class 1 brick chimney. It features a slimline design with clever heat exchanger that provides convected heat in addition to standard radiant heat.
The Asaba's versatile slimline firebox fits a standard 16" (wide) x 22" (high) opening. Thanks to its shallow depth the Asaba only requires a fireplace depth of 125mm plus 20mm debris collection. This makes it a very popular choice where depth and heat output is a priority.
The Asaba can be specified with coal or pebble effect fuel bed. It is available as Manual Control (Rotary), Manual (Fingerslide) or Remote Control.
The Blenheim fret is a traditional cast design with ornate features. It has a very slightly bowed profile and two decorative finials. The Blenheim fret is available in; brass (solid brass), brass & black (solid brass), chrome (chrome plated brass), chrome & black (lightweight aluminium), black (lightweight aluminium). The ashpan is a separate component and provides access, if applicable, to the controls (model dependent). The one-piece frame is held in position with magnets (supplied) and depending on the model is available in; brass effect, chrome effect or black.
Please note the price is dependent upon the final configuration. Natural gas only.
This information is intended for guidance only. Superior Fires recommends booking a Home Survey to determine the actual chimney or flue specification.
Heat Input Gross (High) | 6.2kW |
---|---|
Heat Input Gross (Low) | 3.5kW |
Heat Output Gross (High) | 4.1kW |
Heat Output Gross (Low) | 2.3kW |
Heat Type | Radiant & Convected Heat |
Chimney Flue Compatibility | Pre-Cast (Minimum Size 12,500mm²), Pre-Fabricated - Class 2 (127mm/5" Diameter), Pre-Fabricated - Class 1 (178mm/7" Diameter or Greater), Conventional Chimney - Class 1 (178mm/7" Diameter or Greater) |
Control Ignition | Battery-Free Piezo Spark Ignition (Manual - Rotary Control), Battery Spark Ignition (Manual - Fingerslide Control), Battery Spark Ignition (Remote Control) |
Control Location | Low Level - Front - Behind Ash Pan (Manual - Rotary Control), High Level - Right - Side (Manual - Fingerslide Control), Handset (Remote Control) |
Air Vent Required | Not Required |
Manufacturer Guarantee | 3 Years |
Safety Features | Flame & Oxygen Monitoring Device |
Installation Requirement | Gas Safe Registered Installer (Bord Gais - ROI) |
Installation Information | As with any open fire, a fire guard complying with BS 8423 must be used. Fire guards are intended to protect people from falling into a fire, prevent burns and reduce the risk of injury, particularly to young children and the infirm. In addition it is intended to reduce the risk of fire resulting from clothing and/or other flammable materials coming into contact with, or in proximity to, burning fuel and/or hot surfaces. |
Fuel Type | Natural Gas |
Fire Type | Open Fronted |
Installation Type | Inset |
Engine Type | Slimline Convector |
Width Outline A | 480mm |
Height Outline B | 595mm |
Depth Outline C | 125mm |
Rear Width Min D1 | 235mm |
Rear Width Max D2 | 380mm |
Rear Height E | 545mm |
Opening Width Min X1 | 380mm |
Opening Width Max X2 | 450mm |
Opening Height Min Y1 | 540mm |
Opening Height Max Y2 | 575mm |
Opening Depth Min Z | 145mm |
Packaging Width | 575mm |
Packaging Height | 670mm |
Packaging Depth | 360mm |
Packaging Weight | 16.5kg |
Rebate Depth | 125mm |