DAY RETURNS
INTEREST FREE PAYMENTS
PRICE MATCH PROMISE

Clara Lydney Black and Chrome LED Electric Fire

In stock
Item No:
SF5-030-000
£192.00
  • 2.0kW Heat Output
  • LED Technology
£192.00
Manuals/PDF's Details Specifications Reviews

Clara Lydney LED Electric Fire

  • LED Technology - low energy flame effect
  • Powerful 2.0kW heat output
  • Flame-effect only setting - without heat 
  • Log effect fuel bed
  • OVERVIEW: Great entry level electric fire with LED flame effect

The Clara LED inset electric fire features LED technology designed to significantly improve the flame picture and running performance. LED technology not only provides a deeper, richer flame picture with enhanced flame movement but is also a fraction of the cost to run when compared to a conventional incandescent bulb. It will last a lot longer too. To keep operation simple there are three switch settings: 1) Flame effect only, 2) Flame + 1.0kW Heat and 3) Flame + 2.0kW Heat. The controls are located high underneath the hood for easy accessibility. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The Clara fits a standard fireplace opening, typically 16" wide x 22" high (please refer to specification).

For added convenience one spacer frames is provided (supplied fitted) to allow the Clara to be taken out of the box, placed flush against a flat wall and plugged in for instant heat - no chimney or flue depth required. For installation into a fireplace opening, the spacer frame can be removed. This provides the following options: fully inset (0 spacers - requires a 62mm fireplace depth) or flush-fit (1 spacers - 0mm fireplace depth).

The Lydney has a classic traditional design with ornate vertical bars and delicate form. The moulded plastic front has a bowed profile which features two chrome decorative finials and is integrated to the fire. The electric fire has a moulded black frame with a brass inlay design and is fixed to the fire.

Please note the price is dependent upon the final configuration.
This information is intended for guidance only. Superior Fires recommends booking a Home Survey to determine whether this appliance is compatible with your requirements.

More Information
Heat Input Gross (High) 2.0kW
Heat Input Gross (Low) 1.0kW
Heat Output Gross (High) 2.0kW
Heat Output Gross (Low) 1.0kW
Heat Type Fan Heater
Chimney Flue Compatibility No Chimney or Flue Required
Control Location High Level - Front - Below Canopy (Manual - Switches)
Air Vent Required Not Required
Manufacturer Guarantee 3 Years
Min. Room Size Required None
Safety Features Thermal Trip Switch
Installation Requirement Qualified Electrician Recommended
Installation Information All electric fires feature an automatic safety cut-out device. Simply plug into a standard socket. No chimney or flue required. Designed for use in Great Britain and Republic of Ireland only. All fires must be installed in accordance with the manufacturer’s installation and user instructions and current Building Regulations.
Heat Direction Frontwards
Technology Low energy LED flame effect
Power Voltage Supply 220 - 240V
Colour Black & Chrome
Control Type Manual - Switch Control
Fuel Type Electric
Installation Type Inset
Engine Type LED
Width Outline A 530mm
Height Outline B 635mm
Depth Outline C 62mm
Depth Spacer 1 C1 65mm
Rear Width Min D1 390mm
Rear Width Max D2 535mm
Rear Height E 550mm
Opening Width Min X1 400mm
Opening Width Max X2 450mm
Opening Height Min Y1 560mm
Opening Height Max Y2 580mm
Packaging Width 615mm
Packaging Height 720mm
Packaging Depth 225mm
Packaging Weight 14kg
Write a Review
Your Rating