DAY RETURNS
INTEREST FREE PAYMENTS
PRICE MATCH PROMISE

Clara Victorian Cast LED Electric Fire

In stock
Item No:
SF5-024-000
From £279.00
  • Coal Effect Fuel Bed
  • 2.0kW Heat Output
  • LED Technology
From £279.00
Manuals/PDF's Details Specifications Reviews

Clara LED Inset Electric Fire

  • LED Technology - low energy flame effect
  • Powerful 2.0kW heat output
  • Remote control
  • Flame-effect only setting - without heat 
  • OVERVIEW: Great entry level electric fire with LED flame picture

The Clara LED inset electric fire features LED technology designed to significantly improve the flame picture and running performance. LED technology not only provides a deeper, richer flame picture with enhanced flame movement but is also a fraction of the cost to run when compared to a conventional incandescent bulb. It will last a lot longer too.

The inset electric fire features a 2.0kW heat output, flame effect only setting – no heat, thermostatic control, timer control, full remote control or buttons on the front of the fire below the canopy. A helpful LED display is located in the top left hand corner of the window which displays, flame brightness, timer, thermostatic control and a moulded plastic coal effect fuel bed.  A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The Clara fits a standard fireplace opening, typically 16" wide x 22" high (please refer to specification).

For added convenience two spacer frames are provided (supplied fitted) to allow the Clara to be taken out of the box, placed flush against a flat wall and plugged in for instant heat - no chimney or flue depth required. For installation into a fireplace opening, one or both spacer frames can be removed (depending on the available fireplace depth). This provides the following options: fully inset (0 spacers - requires a 114mm fireplace depth), semi-inset (1 spacer fitted - requires a 54mm fireplace depth) or flush-fit (2 spacers - 0mm fireplace depth).

The Victorian Timeless frame is a premium solid cast design which takes its inspiration from the late Victorian period. The subtle ornate vertical fret bars and discrete finial detail exudes quality. The Victorian frame is available in two finishes: polished cast iron or black. The ashpan is a separate component which sits seamlessly within the cast frame and provides access, if applicable, to the controls (model dependent). The Victorian frame has been manufactured using traditional sand casting techniques therefore naturally, some minor imperfections such as pitting and black residual polishing marks may be visible. This is a direct result of the production and finishing process and is intentionally employed to achieve the authentic appearance. 

Please note the price is dependent upon the final configuration.
This information is intended for guidance only. Superior Fires recommends booking a Home Survey to determine whether this appliance is compatible with your requirements.

Batteries are not included  

More Information
Heat Input Gross (High) 2.0kW
Heat Input Gross (Low) 1.0kW
Heat Output Gross (High) 2.0kW
Heat Output Gross (Low) 1.0kW
Heat Type Fan Heater
Control Location High Level - Front - Below Canopy (Manual - Buttons) & Remote Control
Manufacturer Guarantee 3 Years
Safety Features Thermal Trip Switch
Installation Requirement Qualified Electrician Recommended
Installation Information All electric fires feature an automatic safety cut-out device. Simply plug into a standard socket. No chimney or flue required. Designed for use in Great Britain and Republic of Ireland only. All fires must be installed in accordance with the manufacturer’s installation and user instructions and current Building Regulations.
Heat Direction Frontwards
Technology Low energy LED flame effect
Power Voltage Supply 220 - 240V
Control Type Manual - Button & Remote Control
Fuel Type Electric
Installation Type Inset
Engine Type LED
Width Outline A 480mm
Height Outline B 595mm
Depth Outline C 114mm
Depth Spacer 1 C1 57mm
Depth Spacer 2 C2 57mm
Rear Width Min D1 390mm
Rear Width Max D2 480mm
Rear Height E 555mm
Opening Width Min X1 400mm
Opening Width Max X2 450mm
Opening Height Min Y1 560mm
Opening Height Max Y2 580mm
Opening Depth Min Z 0mm (2 spacers), 57mm (1 spacer), 114mm (0 spacers)
Packaging Width 575mm (Box 1) & 575mm (Box 2)
Packaging Height 670mm (Box 1) & 670mm (Box 2)
Packaging Depth 360mm (Box 1) & 265mm (Box 2)
Packaging Weight 25.5kg
Write a Review
Your Rating