Clara Edwardian Cast LED Electric Fire
- Coal Effect Fuel Bed
- 2.0kW Heat Output
- LED Technology
Clara LED Inset Electric Fire
- LED Technology - low energy flame effect
- Powerful 2.0kW heat output
- Remote control
- Flame-effect only setting - without heat
- OVERVIEW: Great entry level electric fire with LED flame picture
The Clara LED inset electric fire features LED technology designed to significantly improve the flame picture and running performance. LED technology not only provides a deeper, richer flame picture with enhanced flame movement but is also a fraction of the cost to run when compared to a conventional incandescent bulb. It will last a lot longer too.
The inset electric fire features a 2.0kW heat output, flame effect only setting – no heat, thermostatic control, timer control, full remote control or buttons on the front of the fire below the canopy. A helpful LED display is located in the top left hand corner of the window which displays, flame brightness, timer, thermostatic control and a moulded plastic coal effect fuel bed. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The Clara fits a standard fireplace opening, typically 16" wide x 22" high (please refer to specification).
For added convenience two spacer frames are provided (supplied fitted) to allow the Clara to be taken out of the box, placed flush against a flat wall and plugged in for instant heat - no chimney or flue depth required. For installation into a fireplace opening, one or both spacer frames can be removed (depending on the available fireplace depth). This provides the following options: fully inset (0 spacers - requires a 114mm fireplace depth), semi-inset (1 spacer fitted - requires a 54mm fireplace depth) or flush-fit (2 spacers - 0mm fireplace depth).
The Edwardian Timeless frame is a premium solid cast design with integral fret. It is inspired by classic Edwardian period styling and adopts the same traditional iron foundry techniques in its manufacture. The Edwardian frame features three horizontal fret bars with inscribed line detailing and two spherical shaped finials. The angular shaped designed ashpan is a separate component which protrudes forward from the frame and when removed provides access, if applicable, to the controls (model dependent). The Edwardian is available in polished cast iron or black finish. This product has been manufactured using traditional sand casting techniques. Naturally, some minor imperfections such as pitting and black residual polishing marks may be visible, although this is a direct result of the production and finishing process and is intentionally employed to achieve the authentic appearance.
Batteries are not included
Please note the price is dependent upon the final configuration.
This information is intended for guidance only. Superior Fires recommends booking a Home Survey to determine whether this appliance is compatible with your requirements.
|Heat Input Gross (High)||2.0kW|
|Heat Input Gross (Low)||1.0kW|
|Heat Output Gross (High)||2.0kW|
|Heat Output Gross (Low)||1.0kW|
|Heat Type||Fan Heater|
|Control Location||High Level - Front - Below Canopy (Manual - Buttons) & Remote Control|
|Manufacturer Guarantee||3 Years|
|Safety Features||Thermal Trip Switch|
|Installation Requirement||Qualified Electrician Recommended|
|Installation Information||All electric fires feature an automatic safety cut-out device. Simply plug into a standard socket. No chimney or flue required. Designed for use in Great Britain and Republic of Ireland only. All fires must be installed in accordance with the manufacturer’s installation and user instructions and current Building Regulations.|
|Technology||Low energy LED flame effect|
|Power Voltage Supply||220 - 240V|
|Control Type||Manual - Button & Remote Control|
|Width Outline A||480mm|
|Height Outline B||595mm|
|Depth Outline C||114mm|
|Depth Spacer 1 C1||57mm|
|Depth Spacer 2 C2||57mm|
|Rear Width Min D1||390mm|
|Rear Width Max D2||480mm|
|Rear Height E||555mm|
|Opening Width Min X1||400mm|
|Opening Width Max X2||450mm|
|Opening Height Min Y1||560mm|
|Opening Height Max Y2||580mm|
|Opening Depth Min Z||0mm (2 spacers), 57mm (1 spacer), 114mm (0 spacers)|
|Packaging Width||575mm (Box 1) & 575mm (Box 2)|
|Packaging Height||670mm (Box 1) & 670mm (Box 2)|
|Packaging Depth||360mm (Box 1) & 265mm (Box 2)|