Bellevue Flueless Gas Fire
- Energy Efficiency Class A
- 2.0kW Heat Output (Gross)
- Glass Fronted - High Efficiency
Bellevue Wall Mounted High Efficiency Flueless Gas Fire
- Overall Dims (mm): Width 870 x Height 385 x Depth 170 (front of fascia to rear wall)
- Variable Heat Output: 2.0kW (High) 1.3kW (Low) (Gross)
- No Chimney or Flue Required - hangs on a flat wall with just 4 screws
- Requires a 100cm² air vent
- Designed for a min. room size of 23m³ (3.1m x 3.1m x 2.4m)
- Please note a TV cannot be installed above this fire
- OVERVIEW: Widescreen proportions, black glass - super sleek efficient flueless gas fire
The Bellevue's dynamic widescreen proportions and crisp clean lines reflect its contemporary aesthetic making this flueless gas fire a perfect choice to suit your interior. It can be placed on virtually any internal wall providing the freedom to create a stunning statement without the limitations of a chimney or flue. The Bellevue has a fully variable heat output from 1.3kW low to 2.0kW high. It is designed for a minimum room size of 23m³ (typically 3.1m x 3.1m with a 2.4m high ceiling). The fascia is made from a single piece of 5mm toughened black glass which beautifully frames the contemporary gas flame.
Flueless gas fires offer the following benefits: Reduced running costs, simplified installation and servicing. Incorporating the latest in gas fire technology flueless gas fires do not need a chimney or flue to operate. Instead the combustion gases pass through a catalytic system positioned at the top of the appliance which converts carbon monoxide into harmless carbon dioxide and water vapour. Levels of which are so low they are typically present in fresh air. Our innovative technology provides a flexible design allowing you to install a fire not only in the living room but dining room, office, or kitchen. Not suitable for bedrooms or bathrooms.
The only points to consider when installing a flueless gas appliance are a minimum room size (see individual product specification), an accessible 8mm gas supply and the allowance of a 100cm² air vent to be installed in the room. TVs are not permitted to be installed above a flueless gas fire as a majority of the heat generated by the fire comes out of the top.
This Bellevue is available in Manual control (Rotary) positioned on the right hand side of the fire for easy accessibility. There is no requirement for mains power supply or battery for ignition.
Please note the price is dependent upon the final configuration. This information is intended for guidance only. Superior Fires recommends booking a Home Survey to determine suitability.
|Heat Input Gross (High)||2.0kW|
|Heat Input Gross (Low)||1.3kW|
|Heat Output Gross (High)||2.0kW|
|Heat Output Gross (Low)||1.3kW|
|Heat Type||Radiant Heat|
|Chimney Flue Compatibility||No Chimney or Flue Required|
|Control Ignition||Battery-Free Piezo Spark Ignition (Manual - Rotary Control)|
|Control Location||Low Level - Right - Side (Manual - Rotary Control)|
|Air Vent Required||100cm² Air Vent|
|Engine Model||Flueless LS23|
|Manufacturer Guarantee||3 Years|
|Min. Room Size Required||23m³|
|Safety Features||Flame & Oxygen Monitoring Device|
|Installation Requirement||Gas Safe Registered Installer (Bord Gais - ROI)|
|Installation Information||As with any open fire, a fire guard complying with BS 8423 must be used. Fire guards are intended to protect people from falling into a fire, prevent burns and reduce the risk of injury, particularly to young children and the infirm. In addition it is intended to reduce the risk of fire resulting from clothing and/or other flammable materials coming into contact with, or in proximity to, burning fuel and/or hot surfaces.|
|Control Type||Manual - Rotary Control|
|Fuel Type||Natural Gas|
|Fire Type||Glass Fronted - High Efficiency|
|Installation Type||Wall Hung/Mounted|
|Width Outline A||870mm|
|Height Outline B||385mm|
|Depth Outline C||170mm|
|Rear Width Min D1||585mm|
|Rear Height E||330mm|