At Superior Fires we understand that buying a fire or fireplace can be a sometimes daunting and difficult task. You may have read our Help & Advice section, and even shortlisted a few products however, before purchasing you would prefer to be reassured that you have selected the product/s and that they are right for your needs. If this is the case then our Home Survey & Installation service is perfect for you.
Walther Full Depth Convector Inset Gas Fire
- Full depth convector showcases beautiful flame picture
- Requires a min. fireplace depth of 250mm (+ 20mm debris collection)
- Instant 4.0kW heat output (Gross)
- Open fronted for increased realism
- OVERVIEW: Impressive full depth convector gas fire with fantastic flame picture designed for deep fireplace openings
The Walther is a full depth convector inset gas fire designed to fit homes with a larger class 1 or 2 pre-fabricated flue system (min. 127mm or 5" diameter) or conventional class 1 brick chimney. It features a clever heat exchanger that provides convected heat in addition to standard radiant heat. The full depth convector platform uses the same deep burner tray as its full depth radiant counterpart. This signifies that the Walther also produces a stunning flame picture and under bed glow from it's deep fuel bed.
It is important to note that all this technology does come with a trade-off. Despite fitting most fireplace openings, typically 16" wide x 22" high (please refer to product specification - excludes low lintels) the Walther's full depth convector firebox is much larger than other models and requires a minimum of 250mm plus 20mm for debris collection. This can limit its options where installation is concerned and therefore it is important to check its compatibility with the destined fireplace opening.
The Walther is available with coal, pebble or log effect fuel bed, and can be specified in Manual Control (Rotary), Manual (Fingerslide) or Remote Control.
The Edwardian Timeless frame is a premium solid cast design with integral fret. It is inspired by classic Edwardian period styling and adopts the same traditional iron foundry techniques in its manufacture. The Edwardian frame features three horizontal fret bars with inscribed line detailing and two spherical shaped finials. The angular shaped designed ashpan is a separate component which protrudes forward from the frame and when removed provides access, if applicable, to the controls (model dependent). The Edwardian is available in polished cast iron or black finish. This product has been manufactured using traditional sand casting techniques. Naturally, some minor imperfections such as pitting and black residual polishing marks may be visible, although this is a direct result of the production and finishing process and is intentionally employed to achieve the authentic appearance.
Please note the price is dependent upon the final configuration. Natural gas only.
This information is intended for guidance only. Superior Fires recommends booking a Home Survey to determine the actual chimney or flue specification.
| Model Identifier | Conventional Full Depth Inset Convector Heater Gas Category/Pressure = I2H(20) | ||||||
|---|---|---|---|---|---|---|---|
| Heat Input Gross (High) | 6.8kW | ||||||
| Heat Input Gross (Low) | 3.5kW | ||||||
| Heat Output Gross (High) | 4.0kW | ||||||
| Heat Output Gross (Low) | 2.1kW | ||||||
| Direct Heat Output | 3.2kW | ||||||
| Heat Type | Radiant & Convected Heat | ||||||
| |||||||
| |||||||
| |||||||
| Air Vent Required | Not Required | ||||||
| Manufacturer Guarantee | 5 Years | ||||||
| |||||||
| Installation Requirement | Gas Safe Registered Installer (Bord Gais - ROI) | ||||||
| Installation Information | As with any open fire, a fire guard complying with BS 8423 must be used. Fire guards are intended to protect people from falling into a fire, prevent burns and reduce the risk of injury, particularly to young children and the infirm. In addition it is intended to reduce the risk of fire resulting from clothing and/or other flammable materials coming into contact with, or in proximity to, burning fuel and/or hot surfaces. | ||||||
| Fuel Type | Natural Gas | ||||||
| Fire Type | Open Fronted | ||||||
| Installation Type | Inset | ||||||
| Engine Type | Full Depth Convector | ||||||
| Width Outline A | 480mm | ||||||
| Height Outline B | 595mm | ||||||
| Depth Outline C | 250mm | ||||||
| Rear Width Min D1 | 380mm | ||||||
| Rear Width Max D2 | 380mm | ||||||
| Rear Height E | 545mm | ||||||
| Opening Width Min X1 | 380mm | ||||||
| Opening Width Max X2 | 450mm | ||||||
| Opening Height Min Y1 | 540mm | ||||||
| Opening Height Max Y2 | 575mm | ||||||
| Opening Depth Min Z | 270mm | ||||||
| Packaging Width | 575mm (Box 1) & 575mm (Box 2) | ||||||
| Packaging Height | 670mm (Box 1) & 670mm (Box 2) | ||||||
| Packaging Depth | 360mm (Box 1) & 265mm (Box 2) | ||||||
| Packaging Weight | 22kg (Box 1) & 11.5kg (Box 2) | ||||||
| Rebate Depth | 250mm | ||||||
Be the first to write a review and click the button below...
Write a Review
Write a review about the Walther Edwardian Cast Polished Full Depth Convector Gas Fire by completing the form below. Please complete all fields marked with an *
Write a Review
Write a review about the Walther Edwardian Cast Polished Full Depth Convector Gas Fire by completing the form below. Please complete all fields marked with an *
