• BUY DIRECT

    We design, manufacture and sell in the UK

  • BEST PRICE GUARANTEE

    We can't and won't be beaten on price!

  • FREE DELIVERY

    To UK Mainland orders over £249

  • 45-DAY RETURNS

    Don't like it? Send it back! Simple

Chewton Elysee Slimline Radiant Gas Fire

Share
Item no: SF1-017-000
from £211.00
Chewton Elysee Brass

Click to enlarge

Chewton Elysee Slimline Radiant Gas Fire Share
Item no: SF1-017-000
from
£211.00

Gas Fire

This is a conventional open fronted gas fire which doesn’t require an vent as the heat input is less than 7.0kW. The gas fire is suitable for natural gas only and requires an 8mm pipe to supply the gas to the fire.

 

Pre-Cast Flue Chimney

This fire is compatible with a Pre-Cast Flue System. Pre-Cast Flue Chimneys are commonly found in more modern homes which have chimney constructed using a 127mm/5" (class 2), hollow concrete flue blocks. The blocks create a flue up through the property and usually have a ridge vent on the roof.

Class 2 - Pre-Fabricated Flue System

This fire is compatible with a Class 2 Pre-Fabricated Flue System with a minimum internal diameter of 5" (127mm) or greater. 

Class 1 - Chimney / Flue System

This fire is compatible with a Class 1 conventional brick chimney or Pre-Fabricated Flue System with a minimum internal diameter of 7" (180mm) or greater. 

Manual - Rotary Control

This fire is available in manual - rotary control. It incorporates a piezo spark ignition which doesn't require a battery and allows you to operate the fire from LOW to HIGH and turn the fire ON/OFF. The rotary control is located at the bottom of the fire, behind the decorative fret (ashpan).

Manual - Fingerslide Control

Top Control

This fire is available in manual - fingerslide control. The fingerslide control allows you to operate the fire from LOW to HIGH and turn the fire ON/OFF. A battery is required. On our inset fires the fingerslide control is located on the top right hand side of the fire so that you don't have to bend down on your hands and knees to control the fire.

 

Remote Control

This fire is available in remote control.

This remote control system requires a permanent pilot meaning the pilot must be lit manually before the remote control is functional. The remote control can be used to control the operation of the fire from high to low.

NB: The valve is situated at the bottom of the fire behind the fret. The valve must be used to initally light the fire. It also acts as an override in the absence of the remote control handset. 

Radiant Heat

This fire is a radiant gas fire.The heat moves radiates out away from the fire out into the room, the closer you get to the fire the warmer you will get.

 

Guarantee (3 Years)

This product has a 3 year manufacture guarantee. Please see the terms and conditions of your gurantee in the gurantee section.  

Gas Safe Register

This fire must be installed and been serviced annually by a Gas Safe registered installer. For more information about Gas Safe please go to www.gassaferegister.co.uk

3-5 Days Delivery

Pat. Tatem nit alis niamet wis do core dit eum nos nullupt atinibh ea facidunt in exer ing exercin verit praesse quametummy numsandit am, sum dolenibh ese dolore elit, verit praessisim at praessed tissectet lumsan ullutpat wisl et, se facinis dolore molore dolorperatue faciliquat vulputpat aciduisl estrud euguer alit non vero exer se tionsequisi blan exerosto eu facipisim quipis dolore moloborem quat, conum.

  • 3.1kW Heat Output (Gross)
  • Open Fronted

* Required Fields

£211.00
  • BUY DIRECT

    We design, manufacture and sell in the UK

  • BEST PRICE GUARANTEE

    We can't and won't be beaten on price!

  • FREE DELIVERY

    To UK Mainland orders over £249

  • 45-DAY RETURNS

    Don't like it? Send it back! Simple

Chewton Slimline Radiant Inset Gas Fire

  • Slimline Design only requires 110mm (+ 20mm debris collection)
  • Fits almost any chimney or flue type (standard opening - excludes low lintel)
  • Good heat output 3.1kW (Gross)
  • Open fronted for increased realism
  • OVERVIEW: Good entry level slimline gas fire that will fit almost any chimney or flue

The Chewton slimline radiant inset gas fire is one of our most popular models thanks to it's slimline design and affordable price point. It is designed to fit virtually 99% of any modern pre-cast flues, pre-fabricated flue systems (class 1 or class 2 with min. 127mm or 5" diameter) or conventional chimneys. The slimline firebox fits a standard opening, generally 16" wide x 22" high (please refer to product specification). Most importantly this fire only requires a fireplace depth of 110mm plus 20mm for debris collection.

The Chewton has a maximum heat output of 3.1kW (Gross), which provides sufficient heat to warm a medium sized room within a modern home. This fire can be specified with coal or pebble effect fuel bed and is available in either Manual (Rotary), Manual (Fingerslide) or Remote Control. It does not require a mains power supply however, the Manual (Fingerslide) and Remote options require a battery (supplied) for ignition only. 

The Elysee fret is a modern cast design with horizontal curved bars. It has a slightly bowed profile with wider tapering feet detail which deliberately reduces the size of the ashpan making it a less prominent feature of this design. The ashpan is a separate component and provides access, if applicable, to the controls (model dependent). The Elysee fret is available in: brass (solid brass), brass & black (solid brass), chrome (chrome plated brass), chrome & black (lightweight aluminium), black (lightweight aluminium). The Elysee fret is designed to free stand in front of the fire and frame. The one-piece frame is held in position with magnets (supplied) and depending on the model is available in: brass effect, chrome effect or black. 

Please note the price is dependent upon the final configuration. Natural gas only.
This information is intended for guidance only. Superior Fires recommends booking a Home Survey to determine the actual chimney or flue specification.

Heat Input Gross (High)6.2kW
Heat Input Gross (Low)3.5kW
Heat Output Gross (High)3.1kW
Heat Output Gross (Low)1.8kW
Heat TypeRadiant Heat
Chimney Flue CompatibilityPre-Cast (Minimum Size 12,500mm²)
Pre-Fabricated - Class 2 (127mm/5" Diameter)
Conventional Chimney - Class 1 (178mm/7" Diameter or Greater)
Control IgnitionBattery-Free Piezo Spark Ignition (Manual - Rotary Control)
Battery Spark Ignition (Manual - Fingerslide Control)
Battery Spark Ignition (Remote Control)
Control LocationLow Level - Front - Behind Ash Pan (Manual - Rotary Control)
High Level - Right - Side (Manual - Fingerslide Control)
Handset (Remote Control)
Air Vent RequiredNot Required
Manufacturer Guarantee3 Years
Safety FeaturesFlame & Oxygen Monitoring Device
Installation RequirementGas Safe Registered Installer (Bord Gais - ROI)
Installation InformationAs with any open fire, a fire guard complying with BS 8423 must be used. Fire guards are intended to protect people from falling into a fire, prevent burns and reduce the risk of injury, particularly to young children and the infirm. In addition it is intended to reduce the risk of fire resulting from clothing and/or other flammable materials coming into contact with, or in proximity to, burning fuel and/or hot surfaces.
Fuel TypeNatural Gas
Fire TypeOpen Fronted
Installation TypeInset
Engine TypeSlimline Radiant
Width Outline A480mm
Height Outline B595mm
Depth Outline C110mm
Rear Width Min D1215mm
Rear Width Max D2350mm
Rear Height E545mm
Opening Width Min X1350mm
Opening Width Max X2450mm
Opening Height Min Y1540mm
Opening Height Max Y2575mm
Opening Depth Min Z130mm
Packaging Width575mm
Packaging Height670mm
Packaging Depth360mm
Packaging Weight11.5kg
Rebate Depth110mm

Be the first to write a review and click the button below...

Write your own review

Write a Review

Write a review about the Chewton Elysee Brass Slimline Gas Fire by completing the form below. Please complete all fields marked with an *

Write a Review

Write a review about the Chewton Elysee Brass Slimline Gas Fire by completing the form below. Please complete all fields marked with an *

other people also looked at...

  • Home Survey &
    Installation

    Complete installation service
    for your peace of mind

    Learn More

    Home Survey & Installation

    At Superior Fires we understand that buying a fire or fireplace can be a sometimes daunting and difficult task. You may have read our Help & Advice section, and even shortlisted a few products however, before purchasing you would prefer to be reassured that you have selected the product/s and that they are right for your needs. If this is the case then our Home Survey & Installation service is perfect for you.

     

     

  • Free UK
    Delivery*

    Free UK mainland delivery
    on all orders over £250

    Learn More
  • Fire
    Calculator

    Enter your room size and find
    the perfect fire for your home

    Calculate

    Fire Calculator

    Enter in your room size and find the perfect fire place for you.


This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.